Notice: All photos below show the older model BXAVG. The new version installs the same way. Updated photos pending.
BXAVG Installation :
Installation is as simple as unplugging the original Atari chip from the socket on the main game board and plugging the new module into the same socket.
Take care to make sure that pin number 1 as indicated on the board goes to the correct end of the socket. Align pin 1 as indicated on the BXAVG board with pin 1 of the game board socket. Note the silkscreen image (painted outline) on the game board. There should be a notch in the line indicating the end of the socket towards which pin1 must go. Also, there is a physical notch in the plastic frame of the socket itself. This notch always points to pin 1.
Be very careful when inserting or removing the module so as not to bend or break the pins off. They are relatively fragile.
Below are pictures of the BXAVG installed in the six games that support the Atari AVG chip.
Click images to enlarge.
Black Widow:
Gravitar:
Major Havoc:
In the case of Major Havoc, there are some large EPROM chips near the AVG socket. The BXAVG requires a little more height above the game board to clear those EPROM chips. Simply install an extra good quality DIP-40 chip socket into the original AVG socket to add the required height. Then plug in the BXAVG.
Quantum:
Space Duel:
Star Wars:
Here's the BXAVG installed on the Star Wars board alongside the Vectorlabs SW/ESB multi-game board. As you can see, there's no conflicts.
Disclaimer: I have designed and built the BXAVG module with the highest level of quality and attention to detail to which I am capable, however I accept no liability whatsoever for any and all damage or inconvenience that may result from its use or from the use or misuse of any information presented on my web pages. You assume all responsibility for your arcade machines and the components that you install into them.
BXAVG Main ---- BXAVG Features ---- Top ---- Arcade List ---- Home
