Tehkan World Cup
Pinout
This pinout has been worked out with a scope and voltmeter, So forgive me if something is wrong.
I take NO RESPONSIBILITY in any way for anything that happens if you follow this pinout.
IT IS NOT MY FAULT if anything blows up, this is a guide to how MY pcb is wired up only and I cannot garantee that yours will be the same.
ALWAYS CHECK FIRST.
Dont just blindly copy my pinout.
(c)Pyrofer 2000
J1 (Away from sound amp)
| Solder Side | - | - | Parts Side |
| GND | A | 1 | GND |
| GND | B | 2 | GND |
| | C | 3 | |
| | D | 4 | |
| | E | 5 | |
| | F | 6 | +5v |
| | H | 7 | |
| | J | 8 | |
| | K | 9 | |
| | L | 10 | |
| P2 (Blue) Y dir | M | 11 | P2 (Blue) Y clk |
| P2 (Blue) X dir | N | 12 | P2 (Blue) X clk |
| | P | 13 | GND |
| | R | 14 | Video Sync |
| | S | 15 | Video Ground |
| | T | 16 | Video Red |
| | U | 17 | Video Green |
| | V | 18 | Video Blue |
J2 (Next to sound amp)
| Solder Side | - | - | Parts Side |
| | A | 1 | |
| | B | 2 | |
| | C | 3 | |
| P1 (Red) Kick | D | 4 | Coin 1 |
| Coin 2 | E | 5 | P1 Start |
| P2 Start | F | 6 | +5v |
| | H | 7 | |
| | J | 8 | |
| | K | 9 | |
| | L | 10 | |
| P1 (Red) Y dir | M | 11 | P1 (Red) Y clk |
| P1 (Red) X dir | N | 12 | P1 (Red) X clk |
| Speaker - | P | 13 | Speaker + |
| +12v | R | 14 | +12v |
| +5v | S | 15 | +5v |
| +5v | T | 16 | +5v |
| GND | U | 17 | GND |
| GND | V | 18 | GND |
On a personal note, this PCB was an absolute PAIN to work out! Firstly the +12v led didnt work, so
when I CORRECTLY wired up 12v, I thought it was wrong :-( Also, the Kick buttons ONLY work when
you are moving! So you have to have somebody making the player run around while you test the pins.
Lastly, because its a trackball game, you cant just Short an input pin to see where the player moves
as it needs 2 pins for each direction. ARGH.
I must have trawled the net for weeks trying to find this pinout without luck,
so this as far as I know is the FIRST pinout for Tehkan World Cup on the Internet,
yay. I now feel that I have made a real contribution to the arcade collector
community...