Atari Star Wars Color X-Y Monitor
Amplifone Basic Cap Kit

Deflection Board:
1uf 50v		C7/C8/C9/C10*
33uf 250v	C24
100uf 25v	C19/C18

High Voltage PCB:
4.7uf 50v	C5**
220uf 50v	C3/C4
1000uf 50v	C1/C2

Transistors:
2N3716		Q6/Q16
2N3792		Q7/Q17

* These are included as they are in other kits, but my personal recommendation
would be to leave the originals.

** Original is axial capacitor.  May have been replaced with a radial.

Resolder all connector header pins on the bottom side of the pcbs.
Make sure all transistors are insulated & a heatsink compound is used.
Be sure to tighten screws on these transistors for a good collector connection.
Capacitors usually have one lead longer than the other and this longer lead is generally
the positive or + lead and most boards are marked with the + or - negative signs.
They almost always have a striped side which is most often the negative (-), but can
sometimes be marked in the stripe as +, so it is best to look closely at each one before
inserting it.  Pre-cut capacitors will be marked with the + or - sign in the striped area.

The safest course of action when replacing these parts, is to do them one at a time
to lessen your chance of error.  Sometimes when removing multiple parts prior to
installing of the new ones, a couple of the parts may get transposed.