# Attention

The Xevious program code is property of, and owned by NAMCO. Be careful of handling. We aren't concerned at all even if damage happens at all to you because of this.

Ask for it completely with the self-responsibility.

# How to make an execution environment

The circuit board of SUPER XEVIOUS and a "ROM reading and writing machine" are necessary to make XEVIOUS Plus ! execute.

Remove the 10 ROMs of the bottom figure of the original board first, and make a dump-image.

Do a filename as the following.

CPU Board : 1=xvip_1.3p / 2=xvip_2.3m / 3=xvip_3.2m / 4=xvip_4.2l / 5=xvip_5.3f / 6=xvip_6.3j

CHAR Board : 9=xvip_9.2a / 10=xvip_10.2b / 12=xvip_12.3b / 16=xvip_16.4n

( 8Kbytes, others are 4Kbytes only with "xvip_10.2b" )

Acquire the difference file, and carry it out in the directory which made that dump-image. When renewal is finished normally, it is completion if it has this with the ROM and it is changed with the original ROM. And, the one that it executes and which isn't confirmed and which it wants to try leaves only the difference file with the circuit board of us XEVIOUS.

An execution report is being waited for.

# Difference file acquisition

The difference file to XEVIOUS Plus ! from SUPER XEVIOUS. ( Bdiff form )

The difference file to XEVIOUS Plus ! from XEVIOUS. ( Bdiff form ) An execution is unconfirmed over here.

The difference file to XEVIOUS Plus !Release 2 from XEVIOUS Plus !. ( Bdiff form )

The complete set of Super Xevious Plus ! ROMs

Back