Q*BERT'S QUBES     CHIP PLACEMENT

Official Gottlieb "q*bert's qubes" ROMs. © 1984. Written by
Neil Burnstein. Sound by David Thiel.


file	loc	label		type	cksm
----	------	---------	----	----
rom0	c11-12	GV119ROM0	2764	630D
rom1	c12-13	GV119ROM1	2764	B52C
rom2	c13-14	GV119ROM2	2764	81B2
rom3	c14-15	GV119ROM3	2764	D36E
				
bg0	e11-12	GV119BG0	2732	B97A
bg1	e13	GV119BG1	2732	1B16
				
fg0	k4	GV119FG0	27128	10D7
fg1	k5	GV119FG1	27128	FB59
fg2	k6	GV119FG2	27128	97EA
fg3	k7-8	GV119FG3	27128	E84B
				
snd1	u5	GV103SND1	2716	0E4D
snd2	u6	GV103SND2	2716	F2A1


**Note**
These foreground ROM images have been combined from the original
twelve 2764 images which were on the foreground object expansion
module (MA-643).


The following modifications must be made to the board in order
to run the combined ROMs:

  1. Remove (+5V) from K4-26, K5-26, K6-26 and K7/8-26. (cut the trace)
  2. Jumper pin 26 from all the foreground ROM's to A8 pin 12
  3. Remove both R31 and R33 (1K Ohm resistors)
  4. Remove Q2 (2N6044)
  5. Connect the base of Q1 (from front view, pin 1) to A8-15 via a 15KOhm resistor