Typed in by Ray Ghanbari (ray@mayo.edu) Lunar Lander Pinouts PARTS SIDE | SOLDER SIDE ------------------------------------- | | | GND | A | 1 | GND +5V | B | 2 | +5V | C | 3 | AUDIO 2 | D | 4 | AUDIO 1 | E | 5 | COIN CTR POT IN | F | 6 | LAMP 5 LAMP 3 | H | 7 | START/SELECT LED LAMP 2 | J | 8 | LAMP 4 | K | 9 | SELF TEST SLAM | L | 10 | Z OUT | M | 11 | Z GND COIN R | N | 12 | COIN L | P | 13 | START GAME SELECT | R | 14 | ABORT ROT RIGHT | S | 15 | ROT LEFT LED RTN | T | 16 | X GND | U | 17 | X OUT Y GND | V | 18 | Y OUT | W | 19 | 36 VAC | X | 10 | 36 VAC +5V | Y | 21 | +SENSE GND | Z | 22 | -SENSE | | | ------------------------------------- Notes: Thrust POT (pin F) is a 5kohm pot, but only a portion of the range is used. Schematics indicate that the voltage expected at pin F ranges between 2-3.5V. This means any size pot can be used, put put appropriate series resistors on either side of the pot so that the 5V supply is appropriately divided Lamps are status indicators and not necessary for game play (LAMP 1 is always on, which is why there is no LAMP 1 pin)