Pinouts for Atari Video Pinball (1979): ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Typed up by Andy Welburn - 10th April 2000 http://www.willowsp.u-net.com/andy/arcade.htm warlords@ukvac.org.uk This info was obtained from a original Video Pinball Operations manual. Do bear in mind that this game runs on a Black + White monitor, so you'll have to work out some kind of hack before you can convert it to JAMMA ;) 44-pin edge connector ---------------------------------------------------- 16.5v CT | 1 | A | 16.5v CT +10v UNREG | 2 | B | +10v UNREG LOCKOUT COIL | 3 | C | COIN COUNTER ANODE 6 | 4 | D | ANODE 7 +5v | 5 | E | CATHODE 1 CATHODE 2 | 6 | F | CATHODE 3 ANODE 5 | 7 | H | CATHODE 4 ANODE 3 | 8 | J | ANODE 4 ANODE 6 | 9 | K | ANODE 1 VIDEO GND | 10 | L | ANODE 2 SPEAKER GND | 11 | M | VIDEO N/C | 12 | N | SPEAKER PLUNGER 1 | 13 | P | PLUNGER 2 N/C | 14 | R | NUDGE TEST | 15 | S | N/C START | 16 | T | SLAM COIN 2 | 17 | U | COIN 1 RIGHT FLIPPER 2| 18 | V | LEFT FLIPPER 1 25v AC | 19 | W | 25v AC 25v AC | 20 | X | 25v AC GND | 21 | Y | GND 25v CT | 22 | Z | 25v CT All info supplied above is accurate to my knowledge, and i accept full responsibilty if your incompetance results in a blown board/monitor/house fuse/mind. All enquiries about sueing me should be forwarded to the above email address where i will invite you to kiss my big fat juicy grits. enjoy! ;)