This Video Game Pinout Data Sheet Was Typed In By James R. Twine. EMail: TWINE57@SNYDELVA.BITNET -> Mr. Do! Series Connector <- Name Of Games: The "Mr. Do!" Series: "Mr. Do!", "Mr. Do!'s WildRide", "Mr. Do!'s Castle", "Do Run Run". Notes: 1) This PinOut sheet is INCOMPLETE! I will update it when I have time to experiment with the game some more, but this contains enough to get it up, running and playing. [Updated on 12/30/95] 2) The sound that comes from the board requires an external amp. More info l8r! [Still no details[ Solder Side | Parts Side ________________________________|___________________________________ GND | A | 1 | GND ----------------------------|---|---|------------------------------- GND | B | 2 | GND ----------------------------|---|---|------------------------------- +5 | C | 3 | +5 ----------------------------|---|---|------------------------------- +5 | D | 4 | +5 ----------------------------|---|---|------------------------------- | E | 5 | V. Sync ----------------------------|---|---|------------------------------- | F | 6 | H. Sync ----------------------------|---|---|------------------------------- | H | 7 | ----------------------------|---|---|------------------------------- +12 | J | 8 | +12 ----------------------------|---|---|------------------------------- | K | 9 | ----------------------------|---|---|------------------------------- Audio Out | L | 10| ----------------------------|---|---|------------------------------- Audio Out (ref) | M | 11| ----------------------------|---|---|------------------------------- Slam Switch | N | 12| ----------------------------|---|---|------------------------------- 2P Up | P | 13| 1P Up ----------------------------|---|---|------------------------------- | R | 14| ----------------------------|---|---|------------------------------- 2P Right | S | 15| 1P Right ----------------------------|---|---|------------------------------- | T | 16| ----------------------------|---|---|------------------------------- 2P Down | U | 17| 1P Down ----------------------------|---|---|------------------------------- | V | 18| ----------------------------|---|---|------------------------------- 2P Left | W | 19| 1P Left ----------------------------|---|---|------------------------------- | X | 20| ----------------------------|---|---|------------------------------- 2P Start | Y | 21| 1P Start ----------------------------|---|---|------------------------------- Video Red | Z | 22| 1P Fire/Throw ----------------------------|---|---|------------------------------- Video Green | a | 23| 2P Fire/Throw ----------------------------|---|---|------------------------------- Video Blue | b | 24| Coin (1) ----------------------------|---|---|------------------------------- Comp. Sync | c | 25| Coin (2) ----------------------------|---|---|------------------------------- GND | d | 26| GND ----------------------------|---|---|------------------------------- GND | e | 27| GND ----------------------------|---|---|------------------------------- GND | f | 28| GND -------------------------------------------------------------------- From: klibby@ede.sanders.lockheed.com (Kevin D. Libby) notes: 1) A,B,1,2 are connected together on circuit board 2) C,D,3,4 are connected together on circuit board 3) J,8 are connected together on circuit board 4) d,e,f,26,27,28 are connected together on circuit board 5) According to my logic diagrams, horizontal and vertical sync appear unconnected. My machine uses the composite sync. 6) Audio out is low voltage and requires a separate amplifier 7) +12v does not appear to be used on the logic board. It is simply a "pass thru" from the power supply to the audio amp 8) 2nd player connections are for table top model