Game       : Gladiator
Company    : Taito
Year       : 1986
Entered by : Patrick Kellum (patrick@ygw.bohemianweb.com)
Notes      : From the Gladiator manual with additions by me.


 Parts Side         Pin No.  Solder Side

 Ground     *       1    A   Ground     *
 Ground     *       2    B   Ground     *
 +5 Volts   *       3    C   +5 Volts   *
 ?                  4    D   ?
 +12 Volts  *       5    E   +12 Volts  *
 Sound (-)          6    F   Sound (+)
 Meter              7    H   Video Sync
 (Coin Option 2)**  8    J   Video Blue
 Coin SW 1          9    K   Video Green
 ?                 10    L   Video Red
 Sword Middle***   11    M   Sword Middle
 Sword Lower***    12    N   Sword Lower
 Joy Down***       13    P   Joy Down
 Joy Up***         14    R   Joy Up
 Joy Right***      15    S   Joy Right
 Joy Left***       16    T   Joy Left
 Sword Upper***    17    U   Sword Upper
 Select 2P         18    V   Select 1P

"*" Denotes 18 gauge wire, all others will be 22 gauge wire.

"**" This is an option that is dip switch programmable; see dip switch
setting chart.

"***" This is for the 2nd player control panel in cocktail mode (dip switch 6 of
bank 2 turned off).

"?" I have no idea what these do, but they do seem to be connected.  Anyone with
some electrical experance want to check these?

                         ------------------------------

For coin meter connection:

          +6V or +12V (Recomended)      Pin #7 on edge connector
               |                                 |
               |         -------------           |
               |         |           |           |
               ----------|--0000000--|------------
                         |   METER   |
                         -------------

EOF