Franklin Bowen, December 2000 fbowen at my-deja dot com Commodore/Amiga 1084S-P capacitors and adjustments - all capacitor values are voltage and then capacitance. These values were taken from the caps in my monitor and in NO WAY verified Neck board ========== C717 200 4.7 (or is this C716?) 3 pots (RGB drive?) Power board (left side from the back) ====================================== C144 200 47 C145 35 470 C146 25 470 C116 16 47 C122 50 1 C112 200 220 1 pot Left board attached to main board ================================= C258 16 47 Audio amp board (Back board attached to main board) =================================================== C396 16 220 be careful to get polarity right! C394 25 1000 be careful to get polarity right! C395 16 220 C391 50 1 C383 25 4.7 C382 25 4.7 C390 50 1 1 pot Main board ========== C473 50 4.7 BI-POLAR (no polarity on cap, schematics show B.P.)! C474 50 1 C482 50 1 C485 35 22 C537 16 47 C544 16 22 C585 25 4.7 C562 16 100 C446 50 1 C447 25 4.7 C433 16 100 C461 63 2.2 C462 35 22 C491 25 470 C494 200 47 C574 16 100 C492 16 330 C634 16 22 C638 35 100 C636 16 22 C361 16 47 C352 35 680 C493 35 470 C347 35 100 C345 16 10 C334 63 0.47 C346 35 470 (labeled C348 on the bottom of the board) C214 16 100 C216 16 47 C204 10 100 C205 10 100 C206 10 100 polarity??? C505 10 100 C507 16 47 C512 16 47 C511 16 100 C232 16 47 C233 16 100 C234 50 1 C412 16 10 6 pots & 3 other adjustable parts?