ZANEN ELECTRONICS
5023 52nd Street
Lubbock, Texas 79414

806-793-6337 Fax: 806-793-9136
                                                           
Kit # 301 Installation Instructions
                                                           
This monitor repair kit is designed for the Nintendo (Sanyo
20-EZV(R-B,C)) color monitor.

Be sure to check that the following parts are included in the kit:
2 1 uF @50V	1 220 uF @ 25V
3 10 uF @50V	1 330 uF @ 25V
1 22 uF @50V	2 1 uF @250V
1 47 uF @25V	2 10 uF @ 250V
1 100 uF @ 16V	2 100 uF @ 160V

             
Be sure to install all the parts on the monitor even though many of
the original parts seem to be working fine. Age, humidity, and
temperature will cause the value of electrolytic capacitors to change.
Installing all of the parts will assure many more years of trouble
free service. Each capacitor is polarized and can only be inserted in
one direction. Watch the markings for polarity on each capacitor. The
longer lead on each capacitor is the positive (+) lead and should be
inserted into the hole marked positive (+) on the monitor board.

Make sure the game is unplugged and install the following parts.
C458 47 uF @ 25V	C301 10 uF @ 50V
C459 100 uF @ 16V	C302 1 uF @ 50V
C464 22 uF @ 50V	C303 10 uF @ 50V
C467 1 uF @ 250V	C406 10 uF @ 50V
C468 330 uF @ 25V	C407 10 uF @ 250V
C469 220 uF @ 25V	C408 1 uF @ 250V
C471 10 uF @ 250V	C410 100 uF @ 160V
C472 100 uF @ 160V	C453 1 uF @ 50V
Be sure to check your work before turning on the power. If you have
any problems feel free to call us for help.

(C) 1989 Zanen Electronics. All Rights Reserved