ZANEN ELECTRONICS
5023 52nd Street
Lubbock, Texas 79414 

806-793-6337 Fax: 806-793-9136
                                                          
Kit # 104 Installation Instructions
                                                          
This monitor repair kit is designed for the Electrohome 605-802/805
monochrome monitor.

Be sure to check that all the parts are included in the kit:

4 2.2 uF 0 50V              1 4.7 uF 0 250V                
1 47 uF @50V                1 47 uF @ 200V                 
2 1000 uF @ 50V                                            
             
Be sure to install all the parts on the monitor even though many of
the original parts seem to be working fine. Age, humidity, and
temperature will cause the value of electrolytic capacitors to change.
Installing all of the parts will assure many more years of trouble
free service. Each capacitor is polarized and can only be inserted in
one direction. Watch the polarity markings on each capacitor. On the
top side of the monitor board where each  capacitor is located is a
pius sign next to one of the two holes where the capacitor leads are
to be inserted. The plus sign indicates where the positive (+) lead on
the capacitor is to be inserted.

Make sure the game is unplugged and install the following parts.
C900 1000 uF @ 50V	C500 2.2 uF @ 50V
C901 1000 uF @ 50V	C501 2.2 uF @ 50V
C904 47 uF 0 50V	C502 2.2 uF @ 50V
C908 4.7 uF @ 250V	C503 2.2 uF @ 50V
C504 47 uF @ 200V
             
A source for many problems with this monitor is loose solder
connections. It is very common for loose connections to develop where
plugs are soldered to the main and high voltage circuit boards. If you
have any problems feel free to call us for help.