From: dickmillikan Subject: Re: Pac power supply help Date: Sunday, March 05, 2000 8:33 PM The only strap needed is from pins 3 & 4 to the small loop of wire just to the left of the heatsink. Then hookup your switcher to gnd (pins 1,2,A,B) +5V (pins 3,4,C,D), the +12V can got to any or all of the 12VAC inputs (19,20,W,X), no strapping needed, the +12 will take care of itself. Dick * Sent from RemarQ http://www.remarq.com The Internet's Discussion Network * The fastest and easiest way to search and participate in Usenet - Free!