GLADIATOR

TAITO
AMERICA
CORPORATION

660 S. WHEELING RO
WHEELING, IL
312 - 520 - 9280

COPYRIGHT 1986


[ Back to the top | Game Instructions | Notice | Control Panel | Additional Game Play Instructions | Wiring Procedures | Game Play & Dip Switch Settings | Wiring Diagram | Dip Switch Settings | Joystick Template ]

GAME INSTRUCTIONS

Taito America Corporation's "GLADIATOR"TM is a high resolution one-on-one dueling game that provides graphics not seen in many video games.

Our hero, Gurianos, has come to the castle of the evil Gaius. His quest is to battle his way throughout the castle to finally defeat Gaius and save Princess Maitreya.

Equipped with a shield, a coat of armor and his sword Gurianos battles his opponents with the aid of your skill.

Use the joystick to move shield up and down position for defense. Also use the joystick to move Gurianos forward, back, up and down.

Use buttons to attack.

Use joystick to stoop down to pick up spears, shields etc.

As the battle continues Gurianos and his opponents will loose their armor until one is defeated.

Break magic crystal balls to repair Gurianos's armor.

Pick up four spears at start of each stage to turn Gurianos' armor to invincible gold.

"GLADIATOR"TM the ultimate duel for
excitement, adventure and tremendous return of investment.

This manual will guide you in the conversion of your horizontal color monitor upright video game into a "GLADIATOR"TM game. We urge you to read through the instructions before beginning the conversion.


[ Back to the top | Game Instructions | Notice | Control Panel | Additional Game Play Instructions | Wiring Procedures | Game Play & Dip Switch Settings | Wiring Diagram | Dip Switch Settings | Joystick Template ]

NOTICE

Be sure the power supply from your old game is capable of +5 vdc regulated at 6A; +12 vdc regulated at 1A. These operating voltages are necessary for your kit.

TAITO AMERICA CORPORATION KIT PARTS PROVIDED

        1-"GLADIATOR"TM PC BOARD ASSEMBLY

        1-4 WAY JOYSTICK ASSEMBLY

        1-"GLADIATOR"TM CONTROL PANEL OVERLAY

        1-"GLADIATOR"TM MONITOR COVER PLEXIGLASS

        1-"GLADIATOR"TM MARQUEE

        1-WIRING HARNESS

        1-INSTRUCTION CARD WITH REMOVABLE CONTROL STICKERS

        3-BUTTONS

        1-FCC CAGE

        2-PCB MOUNTING BLOCKS

TOOLS AND SUPPLIES REQUIRED

SCREWDRIVER
WIRE CUTTERS
ELECTRIC DRILL WITH BITS
SOLDERING IRON AND SOLDER
PLIERS
PHILLIPS SCREWDRIVER
HEX DRIVER
180-GRIT SANDPAPER
GREASE PENCIL OR MARKER
X-ACTO KNIFE
HACKSAW, JIGSAW OR TABLESAW W/CARBIDE-TIPPED BLADE
ELECTRICAL TAPE OR HEAT-SHRINK TUBING

All games require a certain amount of maintenance to keep in good condition. A periodic check of mechanical controls would be beneficial to guarantee your game will be profitable.


[ Back to the top | Game Instructions | Notice | Control Panel | Additional Game Play Instructions | Wiring Procedures | Game Play & Dip Switch Settings | Wiring Diagram | Dip Switch Settings | Joystick Template ]

CONTROL PANEL

Remove the old control panel buttons or joysticks. Clean and sand smooth any imperfections on the existing lexan material.

Place the template provided in this manual on the control panel to design the best possible positioning for your buttons, joystick and control panel instructions.

Included in this manual is a suggested lay-out of the joystick and button arrangements best suited for ease of game play. Please note that this is not a template to be used for your control panel.

Leave your 1 and 2 player start buttons where they are on the old control panel. (Use the enclosed 1 and 2 player stickers if needed.) Drill holes as needed for installation of the joystick and other buttons. Clean any burrs from around holes. Any hole that is no longer needed we suggest plugging with wood, putty or epoxy.

Remove any soil and/or grime from the front of the old control panel lexan.

Cut the new "GLADIATOR"TM lexan to the appropriate size needed to cover the panel. If possible, leave enough lexan to wrap a small lip around the top and bottom of the panel.

Remove the backing from the "GLADIATOR"TM lexan and apply it over the old control panel being careful to avoid air pockets.

After the lexan is securely on, with an x-acto knife or razor blade cut the holes on the control panel. Install the new joystick, buttons and any hardware that might have been removed on the control panel and tighten them down.

Attach the additional stickers marked "Sword Up, Sword Forward and Sword Down" to the control panel.

ADDITIONAL GAME PLAY INSTRUCTIONS

Your new monitor plexiglass has instructions on it. If when installing the new monitor plexiglass it becomes necessary to cut through the instructions, place the additional set of instructions on the monitor plexiglass.


[ Back to the top | Game Instructions | Notice | Control Panel | Additional Game Play Instructions | Wiring Procedures | Game Play & Dip Switch Settings | Wiring Diagram | Dip Switch Settings | Joystick Template ]

WIRING PROCEDURES

INSTALLING INTERBOARD WIRING

This game comes with a color-coded 3 connector cable for easy installation. Refer to the wiring diagram included in this manual for quick connections.

Disconnect the old wiring harness from the old CPU board.

Carefully remove old circuitboards and FCC cages from the game.

Using the schematic drawings from your old game, carefully note the function of each wire.

Leaving several inches of wire from the old wiring harness at each connector, cut the wires near the game's coin door, monitor, control panel, power supply and speaker wires. Install the new wiring harness to those points following your wiring diagram. Use electrical tape or heat-shrink tubing to insulate all splices.

Install your FCC cage where the old board set was.

Mount the "GLADIATOR"TM PCB assembly with the mounting blocks provided in the center of the FCC cage. Plug the wiring harness onto the PCB and close the cage securely.

If your game has seriespass transistors for the power supply on a seperate heatsink, remount the metal heatsink beside the power supply board.

Check and clean the input jack on the power supply board. Replace any burned or damaged pins.


[ Back to the top | Game Instructions | Notice | Control Panel | Additional Game Play Instructions | Wiring Procedures | Game Play & Dip Switch Settings | Wiring Diagram | Dip Switch Settings | Joystick Template ]

GAME PLAY AND DIP SWITCH SETTINGS

"GLADIATOR"TM has been designed with dip switches for operator-adjustable features for maximum earnings in your location. Using the dip switch chart provided in this manual will allow you to customize the game for your location.

If done properly your game should look new. The conversion is complete.

WE APPRECIATE YOUR PURCHASE OF TAITO AMERICA'S
"GLADIATOR"TM KIT AND SINCERELY HOPE THAT THE GAME PROVIDES
MANY HOURS OF CONTINUED EARNINGS AND ENJOYMENT FOR YOU
AND YOUR PLAYERS.

PLEASE LOOK TO TAITO AMERICA CORPORATION TO ALWAYS
PROVIDE THE VERY BEST IN VIDEO ENTERTAINMENT FOR YOU!


[ Back to the top | Game Instructions | Notice | Control Panel | Additional Game Play Instructions | Wiring Procedures | Game Play & Dip Switch Settings | Wiring Diagram | Dip Switch Settings | Joystick Template ]

WIRING DIAGRAM FOR GLADIATORTM

|  FUNCTION  |   COLOR    |         |    COLOR   |  FUNCTION  |
|GROUND     *|BLK        *|  1 | A  |BLK        *|GROUND     *|
|GROUND     *|BLK        *|  2 | B  |BLK        *|GROUND     *|
|+5 VOLTS   *|RED        *|  3 | C  |RED        *|+5 VOLTS   *|
|            |            |  4 | D  |            |            |
|+12 VOLTS  *|YEL        *|  5 | E  |YEL        *|+12 VOLTS  *|
|SOUND (-)   |BLK/WHT     |  6 | F  |ORG         |SOUND (+)   |
|METER       |BLUE        |  7 | H  |WHT         |VIDEO SYNC  |
|(COIN OPTION 2)**        |  8 | J  |BLU         |VIDEO BLUE  |
|COIN SW 1   |BRN         |  9 | K  |GRN         |VIDEO GREEN |
|            |            | 10 | L  |RED         |VIDEO RED   |
|            |            | 11 | M  |GRN/WHT     |SWORD MIDDLE|
|            |            | 12 | N  |PINK/WHT    |SWORD LOWER |
|            |            | 13 | P  |RED/WHT     |JOY DOWN    |
|            |            | 14 | R  |ORG/WHT     |JOY UP      |
|            |            | 15 | S  |YEL/WHT     |JOY RIGHT   |
|            |            | 16 | T  |BRN/WHT     |JOY LEFT    |
|            |            | 17 | U  |VIO/WHT     |SWORD UPPER |
|SELECT 2P   |BLU/WHT     | 18 | V  |GRY/WHT     |SELECT 1P   |
|                         |         |                         |
|       PARTS SIDE        | PIN NO. |       SOLDER SIDE       |

BLK-BLACK   WHT-WHITE   ORG-ORANGE   YEL-YELLOW   GRN-GREEN

VIO-VIOLET   BLU-BLUE   BRN-BROWN   GRY-GRAY   RED-RED

( xxx/WHT MEANS SOLID COLOR WIRE WITH WHITE STRIPE )

"*" DENOTES 18 GAUGE WIRE, ALL OTHERS WILL BE 22 GAUGE WIRE.

"**" THIS IS AN OPTION THAT IS DIP SWITCH PROGRAMMABLE; SEE DIP SWITCH SETTING CHART.

FOR COIN METER CONNECTION:

+6V OR +12V (RECOMENDED)       PIN #7 ON EDGE CONNECTOR
               |                                  |
               |         --------------           |
               |         |            |           |
               ----------|--00000000--|------------
                         |   METER    |
                         --------------


[ Back to the top | Game Instructions | Notice | Control Panel | Additional Game Play Instructions | Wiring Procedures | Game Play & Dip Switch Settings | Wiring Diagram | Dip Switch Settings | Joystick Template ]

GLADIATORTM KIT DIP SWITCH SETTINGS

_______________________________________________________________
SWITCH BANK "1"         1     2    3    4    5    6    7    8
_______________________________________________________________
EASIEST               |OFF |OFF |    |    |    |    |    |    |
EASY                  |ON  |OFF |    |    |    |    |    |    |
DIFFICULT             |OFF |ON  |    |    |    |    |    |    |
HARDEST               |ON  |ON  |    |    |    |    |    |    |
---------------------------------------------------------------
AFTER 4 STAGES ARE PLAYED:
GAME ENDS             |    |    |OFF |    |    |    |    |    |
GAME CONTINUES        |    |    |ON  |    |    |    |    |    |
---------------------------------------------------------------
BONUS PLAYER:
EVERY 100,000 POINTS  |    |    |    |OFF |    |    |    |    |
ONLY AT 100,000 POINTS|    |    |    |ON  |    |    |    |    |
---------------------------------------------------------------
1 PLAYER              |    |    |    |    |OFF |OFF |    |    |
2 PLAYERS             |    |    |    |    |ON  |OFF |    |    |
3 PLAYERS             |    |    |    |    |OFF |ON  |    |    |
4 PLAYERS             |    |    |    |    |ON  |ON  |    |    |
---------------------------------------------------------------
"CONTINUE" FEATURE    |    |    |    |    |    |    |OFF |    |
NO "CONTINUE" FEATURE |    |    |    |    |    |    |ON  |    |
---------------------------------------------------------------
ATTRACT SOUND OFF     |    |    |    |    |    |    |    |OFF |
ATTRACT SOUND ON      |    |    |    |    |    |    |    |ON  |
---------------------------------------------------------------

_______________________________________________________________
SWITCH BANK "2"         1     2    3    4    5    6    7    8
_______________________________________________________________
COIN SWITCH 1:
1 COIN 1 CREDIT       |OFF |OFF |    |    |    |    |    |    |
1 COIN 2 CREDITS      |ON  |OFF |    |    |    |    |    |    |
1 COIN 4 CREDITS      |OFF |ON  |    |    |    |    |    |    |
1 COIN 5 CREDITS      |ON  |ON  |    |    |    |    |    |    |
---------------------------------------------------------------
*COIN SWITCH 2 (OPTIONAL):
2 COINS 1 CREDIT      |    |    |OFF |OFF |    |    |    |    |
3 COINS 1 CREDIT      |    |    |ON  |OFF |    |    |    |    |
4 COINS 1 CREDIT      |    |    |OFF |ON  |    |    |    |    |
5 COINS 1 CREDIT      |    |    |ON  |ON  |    |    |    |    |
---------------------------------------------------------------
NORMAL PLAY           |    |    |    |    |OFF |    |    |    |
FREE PLAY             |    |    |    |    |ON  |    |    |    |
--------------------------------------------------------------
UPRIGHT MODE          |    |    |    |    |    |    |ON  |    |
COCKTAIL MODE         |    |    |    |    |    |    |OFF |    |
---------------------------------------------------------------
MONITOR REVERSE       |    |    |    |    |    |    |    |OFF |
                      |    |    |    |    |    |    |    |ON  |
---------------------------------------------------------------


[ Back to the top | Game Instructions | Notice | Control Panel | Additional Game Play Instructions | Wiring Procedures | Game Play & Dip Switch Settings | Wiring Diagram | Dip Switch Settings | Joystick Template ]

GLADIATORTM KIT DIP SWITCH SETTINGS (PAGE 2)

_______________________________________________________________
SWITCH BANK "3"         1     2    3    4    5    6    7    8
_______________________________________________________________
NORMAL MODE           |OFF |    |    |    |    |    |    |    |
NO HIT MODE           |ON  |    |    |    |    |    |    |    |
---------------------------------------------------------------
NORMAL MEMORY BACKUP  |    |OFF |    |    |    |    |    |    |
CLEAR MEMORY BACKUP   |    |ON  |    |    |    |    |    |    |
---------------------------------------------------------------
STARTING STAGE 1      |    |    |OFF |OFF |    |    |    |    |
STARTING STAGE 2      |    |    |ON  |OFF |    |    |    |    |
STARTING STAGE 3      |    |    |OFF |ON  |    |    |    |    |
STARTING STAGE 4      |    |    |    |    |    |    |    |    |
---------------------------------------------------------------
NORMAL MODE           |    |    |    |    |    |    |    |OFF |
TEST MODE             |    |    |    |    |    |    |    |ON  |
---------------------------------------------------------------
---------------------------------------------------------------


---------------------------------------------------------------
FACTORY SETTINGS
---------------------------------------------------------------
SWITCH BANK "1"       |ON  |OFF |ON  |ON  |OFF |ON  |OFF |ON  |
SWITCH BANK "2"       |OFF |OFF |OFF |OFF |OFF |OFF |ON  |OFF |
SWITCH BANK "3"       |OFF |OFF |OFF |OFF |OFF |OFF |OFF |OFF |
---------------------------------------------------------------

* IF THIS OPTION IS NEEDED PLEASE REVIEW THE WIRING DIAGRAM AND MAKE NECESSARY MODIFICATIONS.



SUGGESTED ARRANGEMENT OF JOYSTICK & BUTTONS

Picture of the suggested layout (not done yet)


[ Back to the top | Game Instructions | Notice | Control Panel | Additional Game Play Instructions | Wiring Procedures | Game Play & Dip Switch Settings | Wiring Diagram | Dip Switch Settings | Joystick Template ]

JOYSTICK TEMPLATE

FIGURE 3

Picture of the joystick template (not done yet)


[ Back to the top | Game Instructions | Notice | Control Panel | Additional Game Play Instructions | Wiring Procedures | Game Play & Dip Switch Settings | Wiring Diagram | Dip Switch Settings | Joystick Template ]

This page was constructed with
WebLord_Demo 1.0
Copyright © 1997 Udo Schuermann
All rights reserved
This notice appears only in demo copies of WebLord!